Image
Validatie van Heteluchtsterilisatoren

Validation of hot air sterilisers

INTRODUCTION

Hot air sterilisers are used for dry sterilisation of heat-resistant instruments. If you want to demonstrate that your hot air steriliser processes are running correctly, you must have this equipment validated periodically. Bureau Veritas can carry out this validation accurately on your behalf.

Bureau Veritas' Validation & Monitoring department was established in 1985 from Krachtwertuigen (Kwant)  and later KW2. Due to our extensive experience involving process validations, you are assured of a professionally executed procedure. And with our team of ten highly skilled validation technicians, we can plan flexibly.

SCOPE

We validate hot air sterilisers in the medical sector and pharmaceutical industry when required or desired.

STANDARD CONTENT

The Dutch Directive R6111 applies to the validation of hot air sterilisers.

VALIDATION PROCESS

What does the validation process look like? First, we draw up an audit plan with you as a client/user. Important focus points included in this plan:

  • the applicable standard
  • the type of device (make, type, age, status, size etc.)
  • load bearing
  • the processes.

In consultation with you, we also determine at this stage when the validation takes place.

Our validation technician conducts measurements during the sterilisation process and assesses the measurement results according to the applicable standards. Afterwards, the technician will discuss the results with you, and you will receive a preliminary assessment. Within twenty working days, you will receive a final report with all findings and conclusions.

ACCREDITATION

Bureau Veritas' Validation & Monitoring department is accredited as an ISO/IEC17020 type A inspection body. This means the validation we perform is completely independent. In addition, our validations are periodically assessed by the Dutch Accreditation Council (RvA - Raad voor Accreditatie) and by various certification bodies. On the RvA website, you will find the scope of the work areas for which we are accredited.

ADDITIONAL STANDARDS

Instead of the default standards, a client can also opt for its own validation plan, which deviates or goes beyond the applicable standards. A review condition is that the plan refers to those standards, or that the assessment requirements have been fully recorded.

INFORMATION

Would you like to know more about Bureau Veritas' validation of hot air sterilisers? Then call our Validation & Monitoring department (+31 (0)88 450 5710) or send an email to validatienederland@nl.bureauveritas.com.